11/25

ZBD_IIIDL_S_Project/release/DependFile/DependLib/equipmentLib/commonStruct.h

@@ -0,0 +1,173 @@
+#ifndef COMMONSTRUCT_H
+#define COMMONSTRUCT_H
+
+//电刺激相关
+
+#define FRAME_HEAD 0xAA
+#define FRAME_END  0x55
+
+#define FUNCCODE_DIGITAL_GET_INFO        0x81
+#define FUNCCODE_DIGITAL_CONTROL         0X82
+#define FUNCCODE_DIGITAL_PRECONDITIONING 0x83
+#define FUNCCODE_DIGITAL_POWOFF          0x84
+#define FUNCCODE_DIGITAL_ERROR           0x8F
+
+#define FUNCCODE_ANALOG_SETTING          0x91
+#define FUNCCODE_ANALOG_CHANNAL_CONTROL  0x92
+#define FUNCCODE_ANALOG_SET_CURRENT      0x93
+#define FUNCCODE_ANALOG_DATA_UPLOAD      0x94
+#define FUNCCODE_ANALOG_DATA_CHANGE      0x95
+#define FUNCCODE_ANALOG_SET_GAIN         0x96
+#define FUNCCODE_ANALOG_SET_COLLECT      0x97
+#define FUNCCODE_ANALOG_SET_STIMULATE    0x98
+#define FUNCCODE_ANALOG_STATE            0x99
+#define FUNCCODE_ANALOG_ERROR            0x9F
+
+
+#define FUNCCODE_ANALOG_ERROR            0x9F
+
+#include <QObject>
+
+enum PowState
+{
+    PowCancel=0,
+    PowOff=1,
+    PowOn=2
+
+};
+
+
+enum CheckFunc
+{
+    CheckFuncSum,
+    CheckFuncXOR,
+    CheckFuncCRC16
+};
+
+enum LightState
+{
+    LightO1 = 1,
+    LightOff = 2,
+    LightFlicker = 3
+};
+
+enum ModeState
+{
+    ModeOut = 0,
+    ModeIn =1
+};
+
+enum ErrorCode
+{
+    ErrorCheckSum = 0,
+    ErrorFuncCode = 1
+};
+
+
+enum SampleRate
+{
+    SamplingRate4K=4000,
+    SamplingRate8k=8000
+
+
+};
+
+enum WorkMode   //工作模式
+{
+    WorkModeCollect=1,  //采集
+    WorkModeStimulate=2,//刺激
+    WorkModeTrigge=3    //触发
+
+};
+
+enum ChannelState
+{
+    ChannelStateClose = 0,
+    ChannelStateOpen = 1,
+    ChannelStatePause = 2,
+    ChannelStateContinue=3
+};
+
+enum ChannelWorkState   //工作状态
+{
+    ChannelWorkFree = 0,//空闲态
+    ChannelWorkRise = 1,//上坡态
+    ChannelWorkFall = 2,//下坡态
+    ChannelWorkHold = 3,//保持态
+    ChannelWorkBreak = 4//休息态
+};
+
+enum DataMode
+{
+    DataModeRMS = 0,
+    DataModeRaw = 1
+};
+
+enum GainMode
+{
+    GainMode10 = 0,
+    GainMode100 = 1
+};
+
+
+struct DigitalInfo
+{
+    uint8_t adapterState;
+    uint8_t batteryState;
+    uint8_t reset;
+    uint8_t AChannelA;
+    uint8_t AChannelB;
+    uint8_t AChannelC;
+    uint8_t AChannelD;
+};
+
+struct SerialLogInfo
+{
+    int iRevTotalByte;
+    int iGoodFrameCount;
+    int iCheckNGFrameCount;
+    int iRevGoodByte;
+    int iSendFrameCount;
+    int iSendNGFrameCount;
+};
+
+struct AnalogSetting
+{
+    WorkMode workmode;   //模式
+    SampleRate samplerate;//采样率
+    qreal frequency;     //频率
+    int pulseWidth;      //脉宽
+    qreal risingTime;    //上升时间
+    qreal fallingTime;   //下降时间
+    int holdingTime;     //保持时间
+    int breakTime;       //休息时间
+
+};
+
+struct AnalogState
+{
+    ModeState electrodeStateA;
+    ModeState electrodeStateB;
+    ModeState electrodeStateC;
+    ModeState electrodeStateD;
+    ModeState resetState;
+    ChannelWorkState channelWorkStateA;
+    ChannelWorkState channelWorkStateB;
+    ChannelWorkState channelWorkStateC;
+    ChannelWorkState channelWorkStateD;
+};
+
+struct MyoelectricData
+{
+    int ch1;
+    int ch2;
+    int ch3;
+    int ch4;
+};
+
+
+
+Q_DECLARE_METATYPE(MyoelectricData)
+
+
+#endif // COMMONSTRUCT_H