初始版本

2025-08-19 09:49:41 +08:00
parent 10f1ddf1c1
commit 6df0f7d96e
2974 changed files with 1712873 additions and 54 deletions
--- a/app/Inc/IoControl.h
+++ b/app/Inc/IoControl.h
@@ -0,0 +1,108 @@
+/********************************************************************
+  Copyright (c) 2021 Xiangyu Medical Co.，Ltd. All rights reserved.
+  FileName : IoControl.h
+  Author   : zhangdawei
+  Version  : V1.0
+  Date     :
+  Note     :
+  History  :
+********************************************************************/
+#ifndef _IOCONTROL_H__
+#define _IOCONTROL_H__
+/* Includes ------------------------------------------------------*/
+#include "nrf52.h"
+#include "nrf_gpio.h"
+#include "timer.h"
+#include "drv_saadc.h"
+#include "drv_uart.h"
+#include "nrf_drv_gpiote.h"
+//Log需要引用的头文件
+#include "nrf_log.h"
+#include "nrf_log_ctrl.h"
+#include "nrf_log_default_backends.h"
+#include "nrf_delay.h"
+/* Public define -------------------------------------------------*/
+#define MERGE(Msb,Lsb)   ((Msb<<8)|Lsb)
+/* 按键检测 */
+#define KEY_PWR_SWITICH   ( 16 )
+
+/* 电源锁定 */
+#define KEY_POWER         ( 13 )
+/* 指示灯 */
+#define LED_YELLOW        ( 11 )
+#define LED_WHITE         ( 12 )
+/* DAC 引脚*/
+#define PWM_DAC_GPIO      ( 26 )
+
+
+/* 充电芯片引脚定义，低电平是充电中，高电平是充电完成或未充电 */
+#define CHG_MANAGER_EN   ( 15 ) //充电管理芯片的EN引脚，内部200K下拉电阻。 高电平：禁用充电器  ，低电平（Low）或悬空（Floating）：启用充电器
+#define CHG_MANAGER_PPR  ( 23 ) //充电管理芯片的PPR引脚 ，开漏输出，外部上拉3.0V，低电平：输入充电电压正常，高电平：输入充电电压异常
+#define CHG_MANAGER_CHG  ( 14 ) //充电指示引脚，低电平是充电中，充电结束为高电平
+
+#define STIM_RMS_RELAY_PIN          ( 27 )      // 肌电采集继电器控制引脚
+#define STIM_RELAY_PIN              ( 28 )      //刺激继电器控制引脚 
+
+#define SAMPLE_POWER_PIN            ( 20 )      //采样电源控制引脚
+
+#define BOOST_DISCHARGE_PIN         ( 18 )      //boost升压放电引脚
+
+#define BASE_WAVE_06_PIN            ( 6 )     //刺激基础波形控制引脚6
+#define BASE_WAVE_07_PIN            ( 7 )     //刺激基础波形控制引脚7
+#define BASE_WAVE_08_PIN            ( 8 )     //刺激基础波形控制引脚8
+
+#define BOOST_VOLTAGE_CONTROL_PIN   ( 25 )     //boost电压控制引脚
+
+
+
+/* Public typedef ------------------------------------------------*/
+//设备开关机状态
+typedef enum
+{
+    POWER_OPEN = 0,
+    POWER_CLOSE
+}DeviceStateInfo_e;
+// 充电状态
+typedef enum
+{
+    Uncharged = 0,
+    Charging,
+    ChargeComplete
+}ChargingStateInfo_e;
+
+typedef enum
+{
+	Bit_RESET = 0,
+	Bit_SET
+}BitAction;
+
+typedef struct{
+    nrf_drv_gpiote_pin_t KeyPinNumber;
+    bool shineng;
+}KeyStateInfo_t;
+/* Public constants ----------------------------------------------*/
+/* Public variables ----------------------------------------------*/
+extern DeviceStateInfo_e DeviceState;
+extern ChargingStateInfo_e ChargeState;
+extern ChargingStateInfo_e ChargeLastState;
+/* Public function prototypes ------------------------------------*/
+void StartAdv(void);
+void StopAdv(void);
+void GpioInit(void);
+void EXIT_KEY_Init(void);
+void open_acquisition_relay(void);
+void close_acquisition_relay(void);
+void LedControl(void);
+void StimStateInfoStructInit(SchemeData_t SchemeDataIn);
+void VariableInit(void);
+void StimOutCtlOpen(void);
+void StimOutCtlClose(void);
+void StimReleaseOpen(void);
+void StimReleaseClose(void);
+void PreStorageSchemeDataInit(void);
+void KeyPinHandler(void);
+void close_stimulate_relay(void);
+void open_stimulate_relay(void);
+#endif
+
+/*************************** END OF FILE ***************************/