初始版本

external/tile/tile_shim/tile_config.h

@@ -0,0 +1,99 @@
+/**
+ * NOTICE
+ * 
+ * Copyright 2020 Tile Inc.  All Rights Reserved.
+ * All code or other information included in the accompanying files ("Tile Source Material")
+ * is PROPRIETARY information of Tile Inc. ("Tile") and access and use of the Tile Source Material
+ * is subject to these terms. The Tile Source Material may only be used for demonstration purposes,
+ * and may not be otherwise distributed or made available to others, including for commercial purposes.
+ * Without limiting the foregoing , you understand and agree that no production use
+ * of the Tile Source Material is allowed without a Tile ID properly obtained under a separate
+ * agreement with Tile.
+ * You also understand and agree that Tile may terminate the limited rights granted under these terms
+ * at any time in its discretion.
+ * All Tile Source Material is provided AS-IS without warranty of any kind.
+ * Tile does not warrant that the Tile Source Material will be error-free or fit for your purposes.
+ * Tile will not be liable for any damages resulting from your use of or inability to use
+ * the Tile Source Material.
+ *
+ * Support: firmware_support@tile.com
+ */
+
+/** @file tile_config.h
+ ** @brief Configuration for Tile functionality
+ */
+
+#ifndef TILE_CONFIG_H_
+#define TILE_CONFIG_H_
+
+
+/* You need valid Tile Node Credentials [interim_tile_id, interim_tile_key] in order to access Tile Network.
+ * Without valid Tile Node credentials, your prototype will not interoperate with the Tile Network or Tile Mobile Application.
+ * Follow this link to get Tile Node credentials for your prototype: https://www.thetileapp.com/en-us/platform-business-solutions
+ * Then fill interim_tile_id and interim_tile_key with the numbers provided to you by Tile and comment out the warning.
+ */
+#define INTERIM_TILE_ID   {0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00};
+#define INTERIM_AUTH_KEY  {0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00};
+
+#if !defined(INTERIM_TILE_ID) && !defined(INTERIM_AUTH_KEY)
+    #warning Did you get your Tile Node credentials from Tile?
+#endif // !defined(INTERIM_TILE_ID) && !defined(INTERIM_AUTH_KEY)
+
+/*  Model Number Format shall follow the following pattern: "XXXX YY.YY" with the following constraints:
+ *    - "XXXX" uses 4 ASCII letters ('A' to 'Z') to describe the Vendor ID.
+ *    - The Vendor ID is assigned by Tile. Contact firmware_support@tile.com if you don't have one (required before Mass Production).
+ *    - A space character after "XXXX".
+ *    - "YY.YY" uses 4 ASCII numbers ('0' to '9') and describes the Model ID.
+ *  Example: "TEST 00.00".
+ */
+#define TILE_MODEL_NUMBER "TEST 02.00"
+
+/*  HW Version character pattern is "YY.YY" and uses 4 ASCII numbers ('0' to '9').
+ *  Example: "01.00".
+ *  You are free to use any number that is convenient for your product, providing it satisfies the character pattern.
+ */
+#define TILE_HARDWARE_VERSION "00.01"
+  
+/* Firmware Version format shall follow the following pattern: "AA.BB.CC.D" 
+*  - "AA" Firmware Compatibility Number. For a given number, all Firmware binaries are considered compatible. 
+*    This means the CPU is the same and the HW is compatible.
+*  - "BB" TileLib Version. For a given version, TileLib API compatibility is maintained.
+*  - "CC" Build Version. This number is incremented for each build.
+*  - "D" Reserved
+*/
+#define TILE_FIRMWARE_VERSION "01.04.00.0"
+
+#define TILE_DEFAULT_MODE TILE_MODE_SHIPPING
+
+#define TILE_ENABLE_PLAYER 1
+
+/* Button used for reverse ring. */
+/* Also for wakeup when in shipping mode, if sleep is implemented (not implemented in example project) */
+#define TILE_BUTTON          BUTTON_2
+
+/**
+ * @brief Number of TOA channels supported
+ */
+#define NUM_TOA_CHANNELS             3
+
+/**
+ * @brief Diagnostic Version
+ */
+#define DIAGNOSTIC_VERSION           80
+
+#define DEFAULT_TDT_CONFIG (tdt_config_t) { \
+    .Delay       = 45,                      \
+    .EN_DT       = true,                    \
+    .EN_STI      = true,                    \
+    .SE_DTF      = true,                    \
+    .SE_DTS      = true,                    \
+    .FS_Strength = 1,                       \
+    .SS_Strength = 1,                       \
+  }
+
+/**
+ * @brief Size of the TOA message buffer
+ */
+#define TOA_QUEUE_BUFFER_SIZE        (100 + 40 * (NUM_TOA_CHANNELS - 1))
+
+#endif